Under the trend of lithium electron, unbrushed (BLDC), electric tools impose severe requirements on the resistance of core power units, the tolerance of instantaneous large currents and dissipation. The core pains of B-end buyers in selecting models are heat control at high loads, flow protection at instantaneous start, and system life at complex conditions.
In response to these core demands, MOT MOS has developed the high performance MOSFET series tailored for electric tools through an advanced SPT process, the following models:
MOT3617G/MOT4025G/MOT4037S/MOT4615S/MOT4633S/MOT4656S/MOT4674S, etc.
| Part-NO | Package | BVDSS | ID [A] (25°C) | VGS(th) [V] (max) |
| MOT3617G | PDFN5*6 | 30 | 30 | 2. 5 |
| MOT4025G | PDFN5*6 | 40 | 28 | 2. 5 |
| MOT4037S | SOP8 | 40 | 8 | 2. 5 |
| MOT4615S | SOP8 | 40 | 8 | 2. 5 |
| MOT4633G | PDFN5*6 | 40 | 28 | 2. 5 |
| MOT4656S | SOP8 | 40 | 8 | Two. |
The following are the characteristics of the Penang product:
1. Micro-E-class ultra-low internal barrier (RDS(on)) to address extreme heat
Handheld electric tools are limited to compact space and thermal dispersion capacity is limited. The main power model of an ingenuity electric tool (e. g. , 30V/40V/60V series) controls the conduct of electrical resistance at the m-e level, significantly reducing the loss of flux, allowing the tool to remain at the desired temperature while operating at high loads and significantly increasing the continuation of the battery.
2. Excellence in EAS resistance, fearless sudden blockage
Power tools are highly susceptible to instantaneous blockages under conditions such as shock, cutting and so forth, resulting in a huge reactionary electric motion. The entire product was tested 100% by the avalanche energy (EAS) before it was released, with extremely high pressure pliers and high current tolerance, effectively circumventing the failure of the device caused by the secondary penetration.
3. Innovative TOLL-8L seals, release PCB space
Compared to the traditional D2PAK seals, the Toller volume pushed by Jen-Hin reduced by 60 per cent and the height by 50 per cent. Its unique Kelvin connection design can significantly reduce the wiring sense, inhibit switch shocks and provide a lighter, more energy-efficient PCB layout for high power density electric tools.
As a brand in the field of deep-tilled power semiconductor, Gentung has not only provided high-quality hard-core products that fully meet EU RoHS standards, but has become the preferred partner for B-end buyers to optimize combined costs (TCO) and safeguard supply chain elasticity, thanks to a well-established FAE technical team that has a strong indigenous capacity security and rapid response.
